Categories
> NFC RFID Access Control Reader
> Material: Acrylic panel
> Wiegand 26/34 output
> Dimension: 86x86x8mm
> Voltage: DC9~15V
> Working Frequency: 125KHz & 13.56MHz
> Working Indicator: Beeps and LED Indicator
Brand:
S4AItem NO.:
PCD-01NFCNFC RFID Access Control Reader Supports Dual Frequency Cards
Model No.: PCD-01NFC
What is NFC Smart Card Reader?
Reader/Writer mode: NFC-enabled devices are able to read and write to NFC and many other contactless cards. For example, if an NFC tag is attached to a poster, the NFC smartphone can “tap” the tag to access the information stored in the tag (e.g. coupons, maps, product information, etc) easily and conveniently.
Support card:
Standard ID/IC card, ID/IC copy card, NFC, City bus card, CPU card, Bank chip card.
Support card chip:
NXP_Mifare1K, NXP_Mifare4K, NXP_Mifare mini, Ultralight(C), Mifare PlusX(S), Desfire D21 D41 D81, EM4100, EM4200, TK4100.
Model No, | PCD-01 | PCD-02 | PCD-01 NFC | PCD-02 NFC |
Material | Acrylic panel | Plastic panel | Acrylic panel | Plastic panel |
Card type | Standard ID/IC card, ID copy card. | Standard ID/IC card, ID/IC copy card, NFC, City bus card, CPU card, Bank chip card. | ||
Communication | Wiegand26, Wiegand34 | |||
Operating voltage | DC9~15V | |||
Working current | ≤80mA | |||
Stand-by current | ≤30mA | |||
Working frequency | 125KHz & 13.56MHz | |||
Operating temperature | -15°C~60°C | |||
Humidity | 5%~95% | |||
Reader response | ≤100ms | |||
Card reading distance | ≤50mm | |||
Transmission distance | <80m (Without electromagnetic interference) | |||
Working Indicator | Beeps and LED Indicator | |||
Colour | Black, White | |||
Dimension | 86x86x8mm | |||
S4A Datesheet_NFC RFID Access Control Reader Supports Dual Frequency Cards
> Material: Acrylic panel> Wiegand 26/34 output> Dimension: 86x86x8mm> Voltage: DC9~15V> Working Frequency: 125KHz & 13.56MHz> Working Indicator: Beeps and LED Indicator
> Material: Plastic pane> Wiegand 26/34 output> Dimension: 86x86x8mm> Voltage: DC9~15V> Working Frequency: 125KHz & 13.56MHz> Working Indicator: Beeps and LED Indicator
> NFC RFID Access Control Reader> Material: Plastic pane> Wiegand 26/34 output> Dimension: 86x86x8mm> Voltage: DC9~15V> Working Frequency: 125KHz & 13.56MHz> Working Indicator: Beeps and LED Indicator
The S6-RX reader is an advanced 125KHz & 13.56MHz technology proximity reader.Because of metal case anti-vandal and waterproof, it can be mounted either indoor or outdoor in harsh environment.
> Material: Aluminium alloy> Storage capacity: 80,000 pieces> Dimension: 130xφ28mm> Reading technology: Read 125kHz EM(ID) tags proximity
Dimension: 91x30x20mm
From the purchase of raw materials, then each shell must be inspected.This procedure is the soldering of the circuit board.This procedure is assembled.Glue to be testedAccessory area
S4A Automatic Flat door systems with Pull arm or Push arm, support 110V or 220V with a brushed motor> Power supply: 110V or 220V> Opening time: 3~7s / 90°> Opening and holding time: 1-30s> Protection level: IP12D
S4A appreciate any of your inquiries and sincerelyhope to enjoy a fruitful long-term business relationship with youto share in the mutual benefits, If you have any questions, please feel free to contact us.
IPv6 network supported
English
français
Deutsch
русский
italiano
español
português
العربية
Türkçe
Tiếng Việt
Indonesia
