Categories
From the purchase of raw materials, then each shell must be inspected.
This procedure is the soldering of the circuit board.
This procedure is assembled.
Glue to be tested
Accessory area
> Without door position detection output> Voltage: DC12V or DC24V> Holding Force: 180kg(350Lbs)> Current Draw: 12V/480mA 24V/240mA
> Face Plate: 205Lx35WX40H(mm)> Bolt: 16mm(Throw) x 16mm(Diameter)> Voltage: DC12V
> Power supply: 110V or 220V> Opening time: 3~7s / 90°> Opening and holding time: 1-30s> Protection level: IP12D
> Standard Structure: Stainless steel, Wire Drawing Finished> Suitable for Door: especially for glass door frameless below> Opening Mode: 180 °Degress Door> Use with: BL-2001 Series> Finished for Shell: Stainless steel Wire Drawing> Size: 93×47×38mm
>Card reading distance: 0-3M>Antenna: 2DB circular polarization>Operating Voltage: DC12V 80MA
Electric RIM lock with Double Cylinder
> Card type: EM or MF> Waterproof Degree: IP68> Transmit format: WG26/WG34> Ultra- low power consumption: Standby current less than 30mA> Fast Searching speed: Time is less than 0.1S between reading card and opening the door
>Shell material: ABS flame retardant material>Fingerprint capacity: 50 pieces>How to open the door: Swipe/Password/Fingerprint>Swipe module: ID card/IC card (optional)>Operating Voltage: DC12V-18V
S4A appreciate any of your inquiries and sincerelyhope to enjoy a fruitful long-term business relationship with youto share in the mutual benefits, If you have any questions, please feel free to contact us.
IPv6 network supported
English
français
Deutsch
русский
italiano
español
português
العربية
Türkçe
Tiếng Việt
Indonesia
