Electromagnetic locks are commonly used in hotels, offices, and residential blocks as they are secure, reliable and quick to install, as there are few components.
Find out more about electromagnetic door locks at Electric Locking Systems or discover the other entry systems we stock. To get in touch for expert advice and recommendations, contact our friendly team on 01202 941050 or email. Don’t forget, there’s free delivery on orders over £50, and if you order before 5 pm it’s dispatched the same day!
1. Check whether there is a rubber gasket.
2. Check the iron plate end to see if the screws are too loose.
3. Check whether the distance between the magnetic lock body and the suction plate is proper.
1. Check whether the 1A/12V/24V output of the power supply is reduced.
2. Check whether there is any foreign matter (such as dust, rust, foreign matter, etc.) on the surface of the magnet.
1. Check whether the iron plate is equipped with pins.
2. Check whether the iron plate has rubber pads.
3. It is recommended that customers put the screws on the "screw fixing agent.
1. Check whether the main surface of the magnetic lock and the iron plate is completely engaged and free of foreign matter, or adjust the iron plate to loosen it and try.
2. Check whether the voltage and current are sufficient.
1. The "delay adjustment" of the magnetic lock starts timing after power on, not after closing the door.
2. The delay of the magnetic lock is 0, 3, 6, 9 seconds. Check if the time is set to 9 seconds.
Check whether the voltage is sufficient to supply the electromagnetic lock requirements (1A current/12V voltage should be supplied)
The magnetism is not strong, the current is too small, and the power supply is insufficient.
The double-door magnetic lock consumes a lot of power. Check whether the power supply is sufficient (whether it is sufficient for the current and voltage required by the double-door electromagnetic lock, or whether there is line loss).
Factory Address:Building S4A, South Third Lane, Qiuyuling Street, Zhangkeng Village, Hengli Town, Dongguan City, Guangdong Province Office Address:#601,floor 6 ,building 1,JINFANGHUA industrial zone, Bantian St. Longgang Dist. Shenzhen, PRC.
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.