Normally if you buy cards from us.the cards have random numbers.
If you need to write the card with your NEW numbers.then We would offer you RFID demo software.
and guide you how to write cards,you could also refer to manual.
Normally,different country have different frequency regulations.
Our UHF reader could work from 860mhz to 960mhz.
RFID uses the low-end of the electromagnetic spectrum.
The waves coming from readers are no more dangerous than the waves coming to your car radio
It is best to install at a 45-degree angle from the horizontal line.
We suggest you test the detecting effct before installment.
We need to do a self-check firstly:
- we use the demo software,connect UHF readers.and then click “set parameter”
- we can take UHF reader to another more empty place to test,avoiding signal interface
- pay attention to the installment angle for UHF reader
- check if there is other things covered on cards or labels
- check if this UHF cards or tags aging or not
- Check if your UHF cards are from us or not.and if they are EPC GEN2 ISO18000-6C
Please ask sales the profile ‘deal the same number for WG data’
If so,we can try USB to RS232 converter.Or use RS485 interface.
ISO 18000-6 is an international standard governing the way tags and readers communicate in the UHF spectrum.
There are currently three versions: 18000-6A, 18000-6B and 18000-6C. Of these, 18000-6C is by far the most commonly used.
EPC Gen 2 was designed to work internationally and has other enhancements that are significant,
but the real benefit of Gen 2 is that it works anywhere in the world and major manufacturers of chips and tags have lined up behind it.
Factory Address:Building S4A, South Third Lane, Qiuyuling Street, Zhangkeng Village, Hengli Town, Dongguan City, Guangdong Province Office Address:#601,floor 6 ,building 1,JINFANGHUA industrial zone, Bantian St. Longgang Dist. Shenzhen, PRC.
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.