Check whether the power supply voltage is insufficient, the voltage is unstable, and whether the iron sheet magnetism is sufficient.
Whether the magnet piece is aligned with the lock body, check if the lock body is energized.
Electronic locks are locked or unlocked with the assistance of an electrical current. The electrical current is either used to power an electromagnet, a solenoid (electromagnet with a single coil), or a motor. These devices will actuate the lock in a manner that is either fail-safe or fail-secure.
Whether the iron sheet is aligned with the lock body, the lock body is not magnetic, and the lock body is broken.
The lock body is heating up. Check whether the power supply voltage is too large, whether the wire is short-circuited and the contact is poor, or the lock body itself is quality.
The lock body is broken, the service life is long, the aging voltage is unstable, etc.
Check whether the positive and negative poles are connected reversely, the lock tongue does not extend, and check whether the magnet is installed in place.
Smart locks are convenient but, as with any digital technology, they can be hacked. ... however, he does see value in the added security smart locks provide, such as using a camera to see and record whoever is at the door, and the convenience of being able to remotely operate a door.
the answer is NO because you must have power door locks to have it controlled remotely. or the answer could be YES because YOU will be the one installing the power door locks. ... All you need is the power door lock module and relay.
Factory Address:Building S4A, South Third Lane, Qiuyuling Street, Zhangkeng Village, Hengli Town, Dongguan City, Guangdong Province Office Address:#601,floor 6 ,building 1,JINFANGHUA industrial zone, Bantian St. Longgang Dist. Shenzhen, PRC.
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.