A strong enough magnet can destroy just about any electrical device. Especially laptops, computers, cell phones, hard drives, flash drives, or almost any advanced device. They can even destroy an LED screen. ... The magnets don't damage electronics directly.
An electromagnetic lock, magnetic lock, or maglock is a locking device that consists of an electromagnet and an armature plate. There are two main types of electric locking devices. Locking devices can be either "fail-safe" or "fail secure". ... Direct pull electromagnetic locks are inherently fail-safe.
Electromagnetic Fire Door Holders
The magnet is wired to and powered by the fire alarm panel and is automatically switched off in case of fire, releasing the fire door and allowing it to close. The magnetic fire door retainers can also be manually released via a push button.
That is until the power is cut. Because mag locks by design require a constant supply of electricity to remain locked, mag locks are fail-safe only — they do not function to keep the door locked from either side when the power is out.
If the door has a knob or handle, push IN on the door firmly, then use the magnet to unlock the door. If the lock is in contact with the strike, it will not unlock with the magnet. The strike should be adjusted to allow the lock to swing freely. If the door has no handle, make one using tape.
To deactivate the magnetic security strip, all that need be done is to magnetize the strip along its length. This can be done by applying a sufficiently strong magnetic field along the length of the strip.
Be sure the lock is being powered by a DC source and that polarity is correct (RED to positive DC BLACK to negative DC). If the Magnalock is wired in reverse polarity, it won't be damaged, but it will not operate.
If the unit continues to appear dead, it must be electrically checked with an Ammeter. It must be powered with the correct input voltage and checked to see if it draws the specified current. If the unit meters correctly, then the magnet body is operating properly and the problem must lie in the mounting of the strike.
A magnetic door lock is a lock that uses an electric current to produce the magnetic force. Due to the increased strength because of the current, the doors can withstand pressure, so they can’t be forced open without the use of the confirmed access method.
Not unlike what you learn about magnetics, magnetic locks work by north and south end meeting and sealing, but magnetic door locks use an electrical current to produce a stronger magnetic force.
Magnetic door locks use an electromagnetic force to stop doors from opening, so they are ideal for security. Maglocks, such as the Deadlock mag locks are made up of an electromagnet and an armature plate. The plate is attached to the door and the magnetic to the door frame. Depending on the lock chosen, depends on the voltage – and strength – of the electromagnetic force. The rule of thumb is the more expensive the electromagnetic lock the higher the holding force, it can range anything from 250kg all the way up to an impressive 1000kg.
An electromagnetic lock creates a magnetic field when energized or powered up, causing an electromagnet and armature plate to become attracted to each other strongly enough to keep a door from opening. As they require power to remain locked, this allows them to be fail-safe, making electromagnetic door locks safe for use as emergency exits. If the power was to go out in a fire via a fire relay or call button, the door would unlock, allowing people to exit the building.
Factory Address:Building S4A, South Third Lane, Qiuyuling Street, Zhangkeng Village, Hengli Town, Dongguan City, Guangdong Province Office Address:#601,floor 6 ,building 1,JINFANGHUA industrial zone, Bantian St. Longgang Dist. Shenzhen, PRC.
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.