Categories
> Maximum door weight: 180kg
> Maximum door width: 1200mm
> Opening and closing time: 6~12S
> Power supply: AC110-220V±10% 50/60HZ
> Rated power: 55W
Brand:
S4AItem NO.:
D180S-DConcealed Glass Floor Door Closer for double door
Model No.: D180S-D
What is Floor Concealed Door Closers?
The overhead or floor mounted concealed door closer is a very common type of door closer mechanism which is normally unseen and unnoticed. ... Some concealed closers only allow single directional control for opening and closing to a fixed point or door stop.
Maximum door weight | 180KG |
Maximum door width | 1200mm |
Maximum torque | 165Nm |
Noise | <60dB |
Opening and closing time | 6-12S |
Open range | 86°~95° |
Power supply | AC110-220V±10% 50/60HZ |
Rated power | 55W |
Special machine power | <2W |
Operating temperature | -20°C~55°C |
Protection level | IP68 |
Installation process
1.Confirmed the installation position well, produce the corresponding side slot on theground according to set size, wire lay out according to requirements.
2.Connect the set output wire, controller and electric insert lock to do power on testbefore fix the set.
3.Install the up fitting of support (Picture a) on the cross beam, install the down fittingof support (Picture b) and rotating arm rod (Picture c) on the corresponding positionof door leaf.
4.Install the door leaf after set fix position, adjust the opposite position between doorleaf and door frame well through the adjustment screw of set and support, fix the setwell through casting the concrete or tighten support (Picture d)
> Maximum door weight: 180kg> Maximum door width: 1200mm> Opening and closing time: 6~12S> Power supply: AC110-220V±10% 50/60HZ> Rated power: 55W
>Material:cast iron + stainless steel>Scope of application:framed door, wooden door, etc.
>Wired four beam sensor>Working voltage: DC12-24V>Detecting distance:less than 250m
> Output relays: 230V AC, 115V AC, 24V DC/AC, 12V DC/AC (See the label on the detector)> Reaction time: 100ms> Size of Housing: L78 x W40 x H108mm
> Card type: EM Card> Metal case, anti-vandal> Waterproof conforms to IP66> One relay, 2000 users, standalone> Pulse mode, toggle mode> Built-in LDR for anti-tamper> Card block enrolment
>Working frequency :13.56MHZ>Communication speed:106Kboud>Reading and writing distance:2.5~10cm (varies depending on the reading head)>Packaging materials:PVC>Production standards:ISO 14443, ISO 10536
Support Monitoring, Visitor calling, and unlocking functions
EM-22: ID Thin CardsEM-23: ID Thick CardsMF-26: IC Thin CardsMF-27: Philips IC Thin cardUC-1: Ultralight CardsFor Printing Purpose: ID Card with Coating ID Card without Coating
S4A appreciate any of your inquiries and sincerelyhope to enjoy a fruitful long-term business relationship with youto share in the mutual benefits, If you have any questions, please feel free to contact us.
IPv6 network supported
English
français
Deutsch
русский
italiano
español
português
العربية
Türkçe
Tiếng Việt
Indonesia
