Electronic door locks are a way to replace keys or to add additional automation features, like remote locking or unlocking. ... In any type of door lock, a latch or bolt is made to cross the opening between the side of the door and the doorframe, preventing access.
Electronic locks are locked or unlocked with the assistance of an electrical current. The electrical current is either used to power an electromagnet, a solenoid (electromagnet with a single coil), or a motor. These devices will actuate the lock in a manner that is either fail-safe or fail-secure.
Press the PROGRAM button once, enter your new 4 - 8 digit code and then press the LOCK button. 2. Press the PROGRAM button twice, enter the same or a new code and then press the LOCK button once. If your old code still remains in the unit, you will need to perform a hard reset of the unit.
Electric strike locks work by replacing the standard strike (the metal plate with a hole in it that's in the door frame) with an energized strike in which one side is cut out and replaced with a hinged piece of metal. When activated, the piece of metal swings like a saloon door and opens the entrance.
Electric strikes lock require a power supply to function. Electric strikes have some type of keeper, or gate, for the latching mechanism on the lock. When a credential is presented and the strike is disengaged, the gate on the strike will allow the latch to be pulled through the gate.
Reasons: 1. No power supply 2. The power cord is loose;
Solution: 1. Check the power supply 2. Tighten the power cord
Reasons: 1. Insufficient power supply power 2. The door is severely deformed or the door lock is not installed properly, which reduces the contact area between the relay plate and the lock body.
Solution: 1. Make the power output reach the normal working state of the lock. 2. Adjust the door or reinstall the lock. 3. Remove impurities.
Reasons: 1. The iron plate and the main body of the lock are not in complete contact. 2. The position of the reed switch is wrong 3. The external load power exceeds the maximum capacity of the reed switch;
Solution: 1. Adjust the position of the two. Please contact the supplier 3. Please readjust the battery.
Electric mortise locks have normal temperature electric mortise locks, 2-wire low-temperature delay, 5-wire low-temperature delay, and 9-wire low-temperature delay.
Factory Address:Building S4A, South Third Lane, Qiuyuling Street, Zhangkeng Village, Hengli Town, Dongguan City, Guangdong Province Office Address:#601,floor 6 ,building 1,JINFANGHUA industrial zone, Bantian St. Longgang Dist. Shenzhen, PRC.
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.