There are many new customers who are knowing access control products and magnetic lock products for the first time. The most concerned question is whether it is difficult to install. What are the detailed steps for each?
In response to this question raised by most customers, we have written a detailed step below.Of course, if you don't understand anything, you can also call or email us directly.
Email: sales@s4a-access.com Phone: +86 0755 29450011
The following will introduce the magnetic lock installation precautions in detail:
Step 1: First use a screwdriver to open the cover plate, then use a hexagonal wrench to hit the edge plate, ready to install.
Step 2: Take out the installation cardboard, fold the cardboard along the dotted line and place the cardboard in the position where the lock needs to be installed, and then mark the place to be punched and punch the hole.
Step 3: Following the fixing of the iron plate, insert the hexagon socket head screw into the iron plate, place the rubber washer between the two pieces of metal washer, and then set it on the socket head screw. Insert the iron plate into the three holes punched on the door, insert the mushroom head from the other side of the door at the same time, and lock the iron plate on the door with a hexagonal wrench. For the fixing of the side panel B, fix the side panel on the previously punched door frame (fixed in the long hole of the side panel) with two half-round head screws.
Note: Do not lock the side plate, let it move back and forth to facilitate the correction of the position. C. Correct the position of the side plate so that the position of the side plate and the follower iron plate is suitable, so that the main body of the lock can be in close contact with the follower iron plate. Fix the main body of the lock and the side plate. After locking the dome head screws of the side plate, lock all the countersunk head screws, then remove the dome head screws, and drill holes in appropriate positions for wiring. Finally, lock the lock body to the side plate with a hex key.
Step 4: Wire according to the instructions in the manual. Each of our boxes has detailed instructions.If necessary, you can also download directly from our website.
In the next article, we will introduce in detail for Electromangetic Locking Systems how are different brackets installed? such as: L bracket, Z bracket, U bracket or FG bracket for Frameless glass doors.
Factory Address:Building S4A, South Third Lane, Qiuyuling Street, Zhangkeng Village, Hengli Town, Dongguan City, Guangdong Province Office Address:#601,floor 6 ,building 1,JINFANGHUA industrial zone, Bantian St. Longgang Dist. Shenzhen, PRC.
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.