Products
Products
Home /

Tuya and TTlock Smart Devices

/

Wifi Tuya Module

/4CH WiFi Tuya Smart Switch AC/DC 7-32V Remote control support Jog Module

New Products

4CH WiFi Tuya Smart Switch AC/DC 7-32V Remote control support Jog Module

>Input:AC/DC 7V - 32V

>Network: 4G

  • Brand:

    S4A
  • Item NO.:

    S4A-4CH
  • Specifications
  • Download

4CH WiFi Tuya Smart Switch AC/DC 7-32V Remote control support Jog Module

Model No.:S4A-4CH/S4A-4CH-H


Tuya Remote Control


What is a WiFi relay switch?

WiFi Relays are equipped with firmware built into the board that will allow you to control one relay at a time, a bank of relays or all relays at once with manual and automatic refreshing command set. WiFi Relay Controllers allow wireless computer controlled switching from any computer connected to a network.


How do I connect my Tuya Smart Switch?

To connect the device in AP mode, switch the light on and, after 10 seconds, switch it off and then switch it on and off continuously until it starts . ashing quickly (about 3 times a second). Continue switching it on and off until it starts to . ash slowly (about once every 3 seconds).


Input

AC/DC 7V - 32V

Network

4G

Frequency band

2.4G

Connection method

Wifi


Tuya Remote Control

Tuya Remote Control

S4A Datesheet_4CH WiFi Tuya Smart Switch AC/DC 7-32V Remote control support Jog Module

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related Products
Tuya Wifi Switch Button
1CH Tuya wifi switch button single relay module supports 7-32V

>Input: 5v MicroUSb/ DC 7 - 32V>Output: 10A Max,1 gang

2CH Wifi Tuya module
2CH WiFi Smart Switch AC/DC 7V-32V support 433MHz remote control

>Input:AC/DC 7V-32V>Frequency:433Mhz(Without remote control)

Wireless Keypad Reader
Wireless Keypad Reader (Mifare)

> 433MHz Rolling Code technology> PIN Length: 1-6 digits> Card Type: 13.56MHz Mifare card> Wiegand output: 26 bits or 34 bits  > Communication distance: 30m maximum> Ultra low power consumption

RFID Checkpoint
RFID Checkpoint for Guard Tour System

> Passive tag, installed at where patrol needed, work as a label to mark check location> 125kHz, 13.56MHZ ISO15693 and ISO14443A optional> Size: Φ60mm

Standalone Access Control
Standalone Access Control with WG26 or WG34

> Card type: EM Card> Capacity: 2000 users> Working Voltage: DC12-24V> Card Reading Distance: 1~3cm> Dimension: 114x75x16mm

Interlocking Door Module
Control Switch Board Serial Port for Relay Module

> Dimensions: 69x60x15mm> Operating temp: 5A/24V> Material: High-quality elements with superb design> Suitable for Door: Fail-safe electric locks with  signal output> Output Capability: Applied to double-door interlocking

QR Code Reader
QR Code Scanner Barcode Access Control Reader

> ID 125KHz Cards+QR code (Wiegand 26/34output)> Built-in TCP/IP and USB port> Material: PC and Tempered glass> Voltage: 4~15V> Dimension: 86x86x42mm

Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

about

contact