Categories
From the purchase of raw materials, then each shell must be inspected.
This procedure is the soldering of the circuit board.
This procedure is assembled.
Glue to be tested
Accessory area
>Fingerprint capacity: 300 pieces>IC card capacity: 1000 pieces>Password capacity: 1000 pieces
> Input Voltage: AC100-260V> Output Voltage: DC12V 5A
Dimension: 115x70mm
> Card type: EM Card> Metal case, anti-vandal> Waterproof conforms to IP66> One relay, 2000 users, standalone> Pulse mode, toggle mode> Built-in LDR for anti-tamper> Card block enrolment
> Card Type: MF Card> Material: Aluminum alloy> Waterproof Rate: Non-Waterproof> Dimension: 117 X 78 X 22mm
> Material Selection: High Strength Aluminum, Sandblast Finished> Suitable for Door: In-swing Door> Opening Mode: 90° Degrees Door> Finished for Shell: Anodized aluminum
> Input Voltage: AC220V> Input Frequency: 50Hz> Output Voltage: DC12V; NO/NC> Output Current: 5A
Magnetic door holders are used in fire protection doors, These holders keep the doors open during dap to dap operations When smoke is detected the fire alarm transmits a signal which cuts off the power feed and the mechanism releases the door. This avoids fire and smoke expansion
>Fingerprint capacity: 300 pieces>IC card capacity: 1000 pieces>Password capacity: 1000 pieces
> Input Voltage: AC100-260V> Output Voltage: DC12V 5A
Dimension: 115x70mm
> Card type: EM Card> Metal case, anti-vandal> Waterproof conforms to IP66> One relay, 2000 users, standalone> Pulse mode, toggle mode> Built-in LDR for anti-tamper> Card block enrolment
> Card Type: MF Card> Material: Aluminum alloy> Waterproof Rate: Non-Waterproof> Dimension: 117 X 78 X 22mm
> Material Selection: High Strength Aluminum, Sandblast Finished> Suitable for Door: In-swing Door> Opening Mode: 90° Degrees Door> Finished for Shell: Anodized aluminum
> Input Voltage: AC220V> Input Frequency: 50Hz> Output Voltage: DC12V; NO/NC> Output Current: 5A
Magnetic door holders are used in fire protection doors, These holders keep the doors open during dap to dap operations When smoke is detected the fire alarm transmits a signal which cuts off the power feed and the mechanism releases the door. This avoids fire and smoke expansion
S4A appreciate any of your inquiries and sincerelyhope to enjoy a fruitful long-term business relationship with youto share in the mutual benefits, If you have any questions, please feel free to contact us.
IPv6 network supported
English
français
Deutsch
русский
italiano
español
português
العربية
Türkçe
Tiếng Việt
Indonesia
