The recognition speed of the normal testis about 0.5S. The actual application recognition speed is affected by the environment and the face database, and the recognition speed is generally within 1S.
Full kit is 8KG (15*68*19cm)
Inside access control panel box - The controller board will have a sticker on the front labeled "S/N#"
• In the software - Under the "Controllers" section
On the inside door of your Controls panel box - A label will display
No. In order to release a door using the included proximity cards they must first be programmed to the system using the included software.
The recommended cable types are "22 gauge 6-conductor shielded" for Readers and 18 gauge 4 or 6 conductor cable for the locking hardware. Deviation from these recommendations may cause unexpected behavior and or invalidation of your equipment warranty.
Our advantages: easy to install, easy to use, easy to upgrade, high stability, and compatibility.
You may find we don't have a lot of models, but all these models are S4A's elite of 10 years experience in this industry.
For the time being we only have English and Chinese version.
But we could provide demo tool to translate according to your demand.
Brief features-Additional Information
Below are some additional information and a brief list of other features. If you need more detailed information,
please refer to the help guide within the software for further instruction. Or, contact S4A Technical Support.
1: To release any door(s), right-click on “Doors” and select “Remote Open”
2: You can change the open delay for any and all doors.
3: You can unlock or lock any and all doors by changing the control state.
4: If the doors are set to the “Door Closed” mode, it is the equivalent of a lockdown.
No doors will open with cards.
5: The “Door Controlled” option is the normal operating state for the Contactless Card Management system.
6: The attendance and Patrol features are explained further in the help guide within the software.
Additional information and a complete help file are available in the software under help>manual.
Definitions
Peripheral Control: To configure inputs and outputs of the ACB-001 ACB-002 ACB-004input/output modules.
Password Management: For dual-factor authentication or manual entry of card number.
Anti-Passback: Enables/defines parameters for the anti-passback feature.
Interlock: Enables/defines multi-door interlock feature.
First Card Open: Enables/defines the first card open feature, which allows one (or more) card(s) to be configured in such a way
that if one of them opens a door (or doors), the door(s) remain open until a selected time.
Console: Check and adjust the time, upload, download, remotely open, and monitor time options.
Check Status: Checks the communication status of doors.
Factory Address:Building S4A, South Third Lane, Qiuyuling Street, Zhangkeng Village, Hengli Town, Dongguan City, Guangdong Province Office Address:#601,floor 6 ,building 1,JINFANGHUA industrial zone, Bantian St. Longgang Dist. Shenzhen, PRC.
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.