Categories
Support Bluetooth 4.0 on Android 4.4 or IOS 7.0
> Working voltage: DC 9-12V
> 125 KHz or 13.56 MHz; Mobile Blue tooth 4.0
> Communication interface: WG 26/34
> Reading distance: RFID Card: 1-5cm; bluetooth: 0-5M
Brand:
S4AItem NO.:
BT-86Bluetooth Card Reader For Door Access Control WG26 Card Reader
Model No.: BT-86
Introduction:
Appling Mobilephone Bluetooth 4.0 into RFID access control industry is a totally new technology.
Just install 'App', shake mobile phone around the reader or click 'one click to open', verification completed opening the door.
Working voltage | 9-12VDC |
Current | Average 50mA, maxmium100mA |
Frequency | 125 kHz or 13.56 MHz; Mobile Blue tooth 4.0 |
Communication interface | Wiegand26/34 |
Environment: | temperature -20-65, humidity 0 - 95% |
Reading distance: | RFID Card: 1-5cm;Bluetooth:0-5M |
Housing material | ABS |
Supported technology | Bluetooth 4.0 on Android 4.4+ or ios 7.0+ |
P.S: If any standalone access control unit built-in Wiegand Input. Then it's compatible and workable.
S4A User Manual_Bluetooth Card Reader For Door Access Control WG26 Card Reader
>Sensing method: infrared radiation>Protection level: sealed, waterproof, dustproof>Size:1200x200x980(mm)
> Two Accesses: Fingerprint, Pincode> Waterproof, up to IP66> Metal Design & Anti-Vandal
Four-door Network access control board built-in TCP/IP, Support APP/4G/Web-server with free software.Connect 4pcs RFID access reader and 4pcs exit push button>Communication：TCP/IP 10M/100M adaptive
> Card type: EM Card> Metal case, anti-vandal> Capacity: 200fingerprints and 10,000 card> Two accesses: card, fingerprint> Fingerprint access controller and reader, WG26 Input/output
>Three-color lights: red, green and blue lights for identification>Storage capacity: 10 sets of fingerprints, 2 sets for administrator
> Card type: EM or MF Card> Metal structure design, anti-vandal> Digital backlit keyboard> All-in-one, WG26 output/input> Three-way to open the door, card, password, card + password> The doorbell button and interface: buttons and isolation circuit, connect to any external bell
> Wire diameter: 8mm> Door loop length: 400mm
> Card type: EM or EM+HID Card> One relay, 1000 users> Wiegand 26~37 bits input & output> Access modes: Card, PIN, Card + PIN, Multi Cards/PINs> PIN length: 4~6 digits> Pulse mode, toggle mode> 2pcs device support interlock for two door
S4A appreciate any of your inquiries and sincerelyhope to enjoy a fruitful long-term business relationship with youto share in the mutual benefits, If you have any questions, please feel free to contact us.
IPv6 network supported
English
français
Deutsch
русский
italiano
español
português
العربية
Türkçe
Tiếng Việt
Indonesia
