Categories
>USB input voltage:DC5V/2A(USB cannot be usedwith dry battery, only rechargeable battery)
>Battery:DC3V LRO3*2
>Standby current:≤75uA
>Alarming current:≤60mA
Brand:
S4AItem NO.:
Tuya-PIR360degree WiFi PIR Motion Detector
Model No.: Tuya-PIR
What is WiFi PIR Motion Detector?
Wireless motion detectors are wireless security devices that respond to the presence of motion.
Whenever motion is detected, the device will offer a predetermined response depending upon the needs of the end user.
Wireless motion detectors are also great for home automation.
What is the difference between PIR and motion sensor?
PIR or Passive Infrared motion sensors are designed to reliably detect people, large pets & other large warm moving objects. ...
True Detect™ is more than just motion sensing but also includes thermal heat sensing.
The True Detect PIR sensor is triggered when a security camera senses heat whether from people or cars.
USB input voltage | DC5V/2A(USB cannot be usedwith dry battery, only rechargeable battery) |
Battery | DC3V LRO3*2 |
Standby current | ≤75uA |
Alarming current | ≤60mA |
Low-voltage notification | ≤2.2V |
WiFi | 802.11b/g/n |
Detection distance | 6M |
Detection angle | 360degree -installation |
lnstallation method | ceiling /wall |
Working temperature | -10-50℃ |
Working humidity | ≤95%RH |
Unit weight: | 0.05 kg |
Product volume: | 60* 60*52mm |
S4A_Datesheet_360degree WiFi PIR Motion Detector
Elevator Access Control board for 20-40 floors, built-in TCP/IP with free software to manage users. Support RFID/Pincode/Face/Finger to access
> Metal structure design, anti-vandal> Digital backlit keyboard> All-in-one, WG26 output/input
> ID 125KHz Cards+QR code (Wiegand 26/34output)> Built-in TCP/IP and USB port> Material: PC and Tempered glass> Voltage: 4~15V> Dimension: 86x86x42mm
>Sensing distance: 15-25mm>Switch form: NC-Normally Close>Electrical parameters: maximum power 10W, maximum voltage 100V, maximum current 0.5A
> With LED, door senor> Voltage: DC12V or DC24V> Current Draw: 12V/480mAx2 24V/240mAx2> Holding force: 350KGx2 (800LBSx2)
Magnetic door holders are used in fire protection doors, These holders keep the doors open during dap to dap operations When smoke is detected the fire alarm transmits a signal which cuts off the power feed and the mechanism releases the door. This avoids fire and smoke expansion
>Operating Voltage:DC12-24V (optional)>Reading distance:2~6cm>Size:138x50x20mm
>Swipe speed:<200 milliseconds>Wiegand output: 26 bits/34 bits>Software version: V7.107 or above>Hardware driver: V8.92 or above>Output power: DC12v 10OomA (power supply lock and card reader)
S4A appreciate any of your inquiries and sincerelyhope to enjoy a fruitful long-term business relationship with youto share in the mutual benefits, If you have any questions, please feel free to contact us.
IPv6 network supported
English
français
Deutsch
русский
italiano
español
português
العربية
Türkçe
Tiếng Việt
Indonesia
