Categories
>Input:AC/DC 7V-32V
>Frequency:433Mhz(Without remote control)
Brand:
S4AItem NO.:
S4A-2CH2CH WiFi Smart Switch AC/DC 7V-32V support 433MHz remote control
Model No.:S4A-2CH/S4A-2CH-H
What is a WiFi relay switch?
WiFi Relays are equipped with firmware built into the board that will allow you to control one relay at a time, a bank of relays or all relays at once with manual and automatic refreshing command set. WiFi Relay Controllers allow wireless computer controlled switching from any computer connected to a network.
How do I connect my Tuya Smart Switch?
To connect the device in AP mode, switch the light on and, after 10 seconds, switch it off and then switch it on and off continuously until it starts . ashing quickly (about 3 times a second). Continue switching it on and off until it starts to . ash slowly (about once every 3 seconds).
Input | AC/DC 7V-32V |
Frequency | 433Mhz(Without remote control) |
Network | 4G |
Frequency band | 2.4G |
Connection method | Wifi |
S4A Datesheet_2CH WiFi Smart Switch AC/DC 7V-32V support 433MHz remote control
> With LED (Red only)> Voltage: DC12V or DC24V> Current Draw: 12V/500mAx2 24V/250mAx2
>user capacity:1000>authentication mode:Card/password/card+password>temporary password:10
Dimensions: 86x86x38mm
> PCD series is available for OEM and ODM. KR series is not allowed> Delivery terms: EXW factory> This is an RFID card reader only, need to work with the ACB series Control board> Delivery time: If under 500pcs/model, within 2-3working days once confirmed
>Input: 5v MicroUSb/ DC 7 - 32V>Output: 10A Max,1 gang
>Input:AC/DC 7V - 32V>Network: 4G
> Bolt: 17mmDIA, stainless steel 13mm throw> Timer: 0 / 3 / 6 seconds available to set> Signal Output: Door Status Output, NO/COM
> Card type: EM or MF Card> Metal structure design, anti-vandal> Digital backlit keyboard> All-in-one, WG26 output/input> Three-way to open the door, card, password, card + password> The doorbell button and interface: buttons and isolation circuit, connect to any external bell
> With LED (Red only)> Voltage: DC12V or DC24V> Current Draw: 12V/500mAx2 24V/250mAx2
>user capacity:1000>authentication mode:Card/password/card+password>temporary password:10
Dimensions: 86x86x38mm
> PCD series is available for OEM and ODM. KR series is not allowed> Delivery terms: EXW factory> This is an RFID card reader only, need to work with the ACB series Control board> Delivery time: If under 500pcs/model, within 2-3working days once confirmed
>Input: 5v MicroUSb/ DC 7 - 32V>Output: 10A Max,1 gang
>Input:AC/DC 7V - 32V>Network: 4G
> Bolt: 17mmDIA, stainless steel 13mm throw> Timer: 0 / 3 / 6 seconds available to set> Signal Output: Door Status Output, NO/COM
> Card type: EM or MF Card> Metal structure design, anti-vandal> Digital backlit keyboard> All-in-one, WG26 output/input> Three-way to open the door, card, password, card + password> The doorbell button and interface: buttons and isolation circuit, connect to any external bell
S4A appreciate any of your inquiries and sincerelyhope to enjoy a fruitful long-term business relationship with youto share in the mutual benefits, If you have any questions, please feel free to contact us.
IPv6 network supported
English
français
Deutsch
русский
italiano
español
português
العربية
Türkçe
Tiếng Việt
Indonesia
