> Voltage: AC/DC12V~24V
> Installation height: 3~4M
Brand:
S4AItem NO.:
M-204TAutomatic Door Induction Probe Automatic Door Sensor Door Accessories Microwave Sensor
Model No.: M-204T
What is a Microwave Motion Sensor?
A microwave motion sensor uses electromagnetic radiation. It emits waves that are then reflected back to the receiver. The receiver analyzes the waves that are bounced back. If there is an object moving in the room,
these waves are going to be altered. The microwave detector is able to identify changes from moment to moment.
Ideally, the receiver should be receiving the same waves back again and again.
Because of the way that microwave motion sensors work, they can be either more sensitive or less sensitive.
They can identify every minute changes (a totally empty house) or be calibrated to require larger-scale movement (to avoid false positives).
How does a Microwave Sensor work?
A Microwave sensor uses high-frequency radio waves operating at 360 degrees. They work in a similar way to radar, working on changes in the reflected radio waves. They are especially effective in Large areas such as Warehouses monitoring any changes in the return waves and responding immediately
voltage | AC/DC12V~24V ±10% (50~60Hz) |
Power dissipation | <2W (VA) |
Launch power | <20 dBm EIRP |
Launch frequency density | < 5mW/cm² |
Installation height | 3~4M |
Assemble a dip angle | 15°, 30°, 45°, 60° |
Detection mode | Movement |
The maximum checks range | 4x2m (WxH)(while assembling 2.2 meters of altitude) |
Detection speed | 5cm/s (Along the longitudinal axis of air wire |
Dimensions | 115x73mm |
S4A Datasheet_Automatic Door Induction Probe Automatic Door Sensor Door Accessories Microwave Sensor
ACB-T01 Single door Network Access Control board Control 1 door> Support 2pcs RFID access reader or 1pcs RFID access reader+1pcs Exit button> Free software to manage users> Real-time monitor
> Panel: Aluminium magnesium alloy> Handle: 304 Stainless Steel> Colors: Silver/Golden/Red Bronze/Wooden Heart Mix> Surface treatment: PVD/drawing
> Support 500 PIN/card users/4-8 digits PIN, 125KHz EM Card> With two Standard Remote Transmitters> 433MHz Rolling Code technology> Communication distance: 50m Max> Ultra low power consumption
> Communication way 433MHz(±500KHz) > Power Wireless lock: 4pcs AA batteries> Transmit: 1pcs lithium battery> Working distance Within 5 meters> Door-opening Angle 180°> With Door Magnetic sensor
> Metal design & Waterproof Keypad, Can install it in outside> 433MHz Rolling Code technology> 500PIN/card users> 4~8 digits PIN, 125KHz EM card> Communication distance: 50m Max> Open/Close by Keypad, transmitter, or touch the lock
> Card type: EM Card> Metal case, anti-vandal> One Programming relay output > Multi-color LED Status Display > 1000 Users (100 Fingerprint + 890 Card + 10 Visitor)> Mini Size: L105 x W69 x H20 mm > Capacitive Fingerprint Sensor
> Metal design & Waterproof Keypad, can install outside> 433MHz Rolling Code technology> 500PIN/card users> 4~8 digits PIN, 125KHz EM card> Communication distance: 50m Max> Open/Close by Keypad, transmitter, or touch the lock
> Wire diameter: 8mm> Door loop length: 400mm
S4A appreciate any of your inquiries and sincerelyhope to enjoy a fruitful long-term business relationship with youto share in the mutual benefits, If you have any questions, please feel free to contact us.
IPv6 network supported
English
français
Deutsch
русский
italiano
español
português
العربية
Türkçe
Tiếng Việt
Indonesia
