> Waterproof conforms to IP66
> Two-Relays Controller, 1100 users
> 3 access modes: Card, PIN, Card + PIN
> Card type: 125KHZ EM card
> PIN length: 4~6 digits
> Wiegand 26 bits input & output
> Facility code programmable
> Latch mode to hold door or gate open
Brand:
S4AItem NO.:
SK1Metal Housing IP68 waterproof RFID card Reader with Dual-relay
Model No.: SK1 Dual-relay
> Waterproof conforms to IP66
> Two-Relays Controller, 1100 users
> 3 access modes: Card, PIN, Card + PIN
> Card type: 125KHZ EM card
> PIN length: 4~6 digits
> Wiegand 26 bits input & output
> Facility code programmable
> Latch mode to hold door or gate open
User Capacity | 1100 Card/PIN |
Operating Voltage | 12-28V AC/DC |
Idle Current | 55mA |
Active Current | 80mA |
Keypad | 12 Key (3*4) |
PIN length | 4 ~ 6 digits |
Proximity Card Reader | EM |
Radio Technology | 125KHz Industry Standard Proximity Card |
Read Range | 3 ~ 6 cm |
Wiring Connections | Electric lock, exit button, |
DOT, external alarm, Wiegand (in/out) | |
Relay | ONE (NO, NC, COM) |
Adjustable Relay Output Time | 1 ~ 99 Seconds (5 seconds default) |
Adjustable Alarm Output Time | 1 ~3 minutes (1-minute default) |
Lock Output Load | 3 Amp Maximum |
Alarm Output Load | 3 Amp Maximum |
Wiegand Interface | Wiegand 26 bit input/output |
Environment | Meets IP66 |
Operating Temperature | -30℃ ~ 60℃ (-40°F ~ 140°F) |
Operating Humidity | 10% ~ 90% Non-Condensing |
Physical | Zinc-Alloy Enclosure |
Surface Finish | Powder Coat |
Dimensions | 120L x 76W x 25H (mm) |
Unit Weight | 600g |
Shipping Weight | 700g |