Categories
>Input: 5v MicroUSb/ DC 7 - 32V
>Output: 10A Max,1 gang
Brand:
S4AItem NO.:
S4A-1CN1CH Tuya wifi switch button single relay module supports 7-32V
Model No.:S4A-1CN/S4A-1CN-H
What is a WiFi relay switch?
WiFi Relays are equipped with firmware built into the board that will allow you to control one relay at a time, a bank of relays or all relays at once with manual and automatic refreshing command set. WiFi Relay Controllers allow wireless computer controlled switching from any computer connected to a network.
How do I connect my Tuya Smart Switch?
To connect the device in AP mode, switch the light on and, after 10 seconds, switch it off and then switch it on and off continuously until it starts . ashing quickly (about 3 times a second). Continue switching it on and off until it starts to . ash slowly (about once every 3 seconds).
Input | 5v MicroUSb/ DC 7 - 32V |
Output | 10A Max,1 gang |
Item weight | 35g |
WIFI | IEEE 802.11 b/g/n 2.4GHz |
Frequency | 433.92Mhz(Without remote control) |
Information transmission | voice |
Network | 4G |
Frequency band | 2.4G |
Connection | WIFI |
S4A Datesheet_1CH Tuya wifi switch button single relay module supports 7-32V
>SPDT / NO/NC/COM>Surface: Surface Mount>Material: ABS, PC (transparent part)
EM-22: ID Thin CardsEM-23: ID Thick CardsMF-26: IC Thin CardsMF-27: Philips IC Thin cardUC-1: Ultralight CardsFor Printing Purpose: ID Card with Coating ID Card without Coating
Control 1 door via TCP/IP with AC110~240V 5A access power supply and backup battery space
>Operating Voltage:DC9-DC12V>Relay:NO/NC/COM>Reading Distance:1 ~ 10cm
>Input:AC/DC 7V-32V>Frequency:433Mhz(Without remote control)
>Input:AC/DC 7V - 32V>Network: 4G
>Dimensions: 86x86x35mm>Output Contact: +12V GND NO NC COM>Suitable for Door: Hollow Door>Standard Structure: Stainless steel Panel, Steel Button
>Panel material: 1.8mm thick stainless steel>Working voltage: 12V-24DC>Contact output: NO/NC/COM (three terminals)
>SPDT / NO/NC/COM>Surface: Surface Mount>Material: ABS, PC (transparent part)
EM-22: ID Thin CardsEM-23: ID Thick CardsMF-26: IC Thin CardsMF-27: Philips IC Thin cardUC-1: Ultralight CardsFor Printing Purpose: ID Card with Coating ID Card without Coating
Control 1 door via TCP/IP with AC110~240V 5A access power supply and backup battery space
>Operating Voltage:DC9-DC12V>Relay:NO/NC/COM>Reading Distance:1 ~ 10cm
>Input:AC/DC 7V-32V>Frequency:433Mhz(Without remote control)
>Input:AC/DC 7V - 32V>Network: 4G
>Dimensions: 86x86x35mm>Output Contact: +12V GND NO NC COM>Suitable for Door: Hollow Door>Standard Structure: Stainless steel Panel, Steel Button
>Panel material: 1.8mm thick stainless steel>Working voltage: 12V-24DC>Contact output: NO/NC/COM (three terminals)
S4A appreciate any of your inquiries and sincerelyhope to enjoy a fruitful long-term business relationship with youto share in the mutual benefits, If you have any questions, please feel free to contact us.
IPv6 network supported
English
français
Deutsch
русский
italiano
español
português
العربية
Türkçe
Tiếng Việt
Indonesia
