Categories
>Input:AC/DC 7V-32V
>Frequency:433Mhz(Without remote control)
Brand:
S4AItem NO.:
S4A-2CH2CH WiFi Smart Switch AC/DC 7V-32V support 433MHz remote control
Model No.:S4A-2CH/S4A-2CH-H
What is a WiFi relay switch?
WiFi Relays are equipped with firmware built into the board that will allow you to control one relay at a time, a bank of relays or all relays at once with manual and automatic refreshing command set. WiFi Relay Controllers allow wireless computer controlled switching from any computer connected to a network.
How do I connect my Tuya Smart Switch?
To connect the device in AP mode, switch the light on and, after 10 seconds, switch it off and then switch it on and off continuously until it starts . ashing quickly (about 3 times a second). Continue switching it on and off until it starts to . ash slowly (about once every 3 seconds).
Input | AC/DC 7V-32V |
Frequency | 433Mhz(Without remote control) |
Network | 4G |
Frequency band | 2.4G |
Connection method | Wifi |
S4A Datesheet_2CH WiFi Smart Switch AC/DC 7V-32V support 433MHz remote control
> Maximum door weight: 180kg> Maximum door width: 1200mm> Power supply: AC220V ±10% 50/60Hz> Rated power: 55W
>Fingerprint capacity:10 sets of fingerprints>Fingerprint settings:local settings>Fingerprint collection time:≤0.5 seconds
> Size of stainless steel bolt:12.6MM> Sticking-out length: 15mm
>Working voltage:12/24V(Adjustable time delay)Red-Power supply(+) White-COMBlack-Power ground(-) Yellow-NC>Working current:Start state 1.2A>Persistent state 200mA
>Input: 5v MicroUSb/ DC 7 - 32V>Output: 10A Max,1 gang
>Input:AC/DC 7V - 32V>Network: 4G
> 1000 face users, 3000 card users (including 10 administrators)> Card type: EM Card or Mifare Card (Optional)> Multiple Access: face or card, card + face, face only or card only
>User capacity:1000 cards, passwords>Fingerprint:200>Video:Video intercom (Tuya APP)
> Maximum door weight: 180kg> Maximum door width: 1200mm> Power supply: AC220V ±10% 50/60Hz> Rated power: 55W
>Fingerprint capacity:10 sets of fingerprints>Fingerprint settings:local settings>Fingerprint collection time:≤0.5 seconds
> Size of stainless steel bolt:12.6MM> Sticking-out length: 15mm
>Working voltage:12/24V(Adjustable time delay)Red-Power supply(+) White-COMBlack-Power ground(-) Yellow-NC>Working current:Start state 1.2A>Persistent state 200mA
>Input: 5v MicroUSb/ DC 7 - 32V>Output: 10A Max,1 gang
>Input:AC/DC 7V - 32V>Network: 4G
> 1000 face users, 3000 card users (including 10 administrators)> Card type: EM Card or Mifare Card (Optional)> Multiple Access: face or card, card + face, face only or card only
>User capacity:1000 cards, passwords>Fingerprint:200>Video:Video intercom (Tuya APP)
S4A appreciate any of your inquiries and sincerelyhope to enjoy a fruitful long-term business relationship with youto share in the mutual benefits, If you have any questions, please feel free to contact us.
IPv6 network supported
English
français
Deutsch
русский
italiano
español
português
العربية
Türkçe
Tiếng Việt
Indonesia
