What automatic swing doors are used by more and more people?
The door is no stranger in our real life. Almost all buildings and indoor houses will install doors. The doors installed in different places and positions are different. Generally, glass automatic doors are installed on the main doors of buildings, elevator doors are installed at elevator entrances, fire doors are installed in the stairwells of safe passages, and anti-theft doors and public parts are installed in the office area on each floor. It can be seen that there are various doors.
The automatic swing door is opened, that is, driven by a motor, and the hydraulic door closer is closed. Its structure and working principle are that the motor drives the heavy-duty hydraulic door closer through the oil pump to realize the door opening process, and then the door is closed by the door closer. With the maturity of hydraulic door closer technology, the door closer can control the opening and closing process very well. In other words, it makes users feel very comfortable.
All moving parts are in a closed state, completely avoiding the abrasion caused by dust accumulation. In addition to the high-power motor and the super heavy-duty door closer, the super-heavy electro-hydraulic automatic swing door driver is the most important to keep its open state through the electromagnetic hydraulic valve of the door closer. Therefore, the length of the open-circuit time will not have any impact on its circuit and motor. The electro-hydraulic automatic swing door has been widely used due to its fully enclosed structure design. Therefore, it is a maintenance-free automatic door machine.
Installation explanation of automatic swing door:
1. The door has no special requirements. As long as there are installation conditions, ordinary side doors can become automatic doors. The only requirement is that heavy-duty automatic door openers should be equipped with high-strength hinges because when the gantry crane is running, the opening torque exerts a great force on the hinges.
2. There are special rubber seals around the movable door, which can be reliably attached to the door frame when the door is closed to ensure the airtightness of the door. The sealing performance meets the GB/t7107-2002 national standard
3. The power beam is made of aluminum alloy, with a special V-shaped track and annular groove design, which can meet the sealing requirements when closing. The overall structure is reasonable and reliable, and the service life is more than 1 million times.
4. The door body is designed with a large flat stainless steel plate or aluminum plate surface sprayed with plastic and is equipped with a sealing strip to meet the sanitary requirements of the hospital.
5. The special controller and footswitch have superior performance. The medical staff only need to put their feet into the switch box, and the automatic door can be opened and closed, and it can also be manually opened and closed. Manual thrust is less than 100N.
6. Optional safety sensor, which can effectively prevent people from being jammed, and can be set to drive sensor to automatically open the door from the room. It is safe, reliable, and easy to maintain.
The door is indispensable in our lives, it is especially important in family life. The so-called door is a family, which also means the importance of going out in our actual lives. Through the above-detailed introduction of the automatic door opener, I believe that everyone has a certain understanding and understanding of the relative advantages and characteristics of automatic swing doors. Such doors are usually installed in shopping malls, entertainment venues, supermarkets, or office buildings. It can automatically check whether someone enters or exits, thereby automatically opening the door, which not only saves labor costs but also provides convenience for everyone.
Author: Written by Ms Danny Zeng from S4A INDUSTRIAL CO.,LIMITED
Factory Address:Building S4A, South Third Lane, Qiuyuling Street, Zhangkeng Village, Hengli Town, Dongguan City, Guangdong Province Office Address:#601,floor 6 ,building 1,JINFANGHUA industrial zone, Bantian St. Longgang Dist. Shenzhen, PRC.
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.