Commonly used electric locks for access control are:
Electric mortise locks, magnetic locks, electric locks, electric control locks, etc. (Sorted by usage penetration rate)
Some people also call it "anode lock", but in fact it is just a kind of "anode lock", that is, an electric lock that opens the door when the power fails. Because according to fire protection requirements, in case of fire, the building will automatically cut off the power supply, and the electric lock should be opened to facilitate the escape of personnel, so most electric locks open the door when the power is turned off.
Electric Dropbolt Lock: usually used for glass doors, wooden doors, etc. Advantages: hidden security, beautiful appearance, good security, not easy to be pried open and pulled open. Disadvantages: It is difficult to dig the keyhole during installation.
Remarks: Some glass doors have no threshold (that is, the door frame is also made of glass), or the top of the glass door is not hemmed, so you need to buy upper and lower frameless glass door electric mortise locks and lock clips for installation.
Also called electromagnetic lock, it is a kind of lock that relies on the suction force generated between the electromagnet and the iron block to close the door.The magnetic lock is also an electric lock that opens the door when the power is turned off.
Electric lock: (Electric Strike lock)
Some people also call it "cathode lock", but it is not true, it is just one of the models that is a kind of cathode lock.
It is installed on the side of the door and must be used with a mechanical lock, that is, the deadbolt of the ball lock.
Electric RIM lock:
It is mainly used for the unit door of the residential area, the second door of the bank savings office, etc. It can also be opened with the knob or key locked inside the door
Disadvantages: The impact current is large, which has a great impact on the stability of the system, and there is a "snap" sound when the door is opened, and the noise is relatively large.
Author:Written by Ms.Vivian He from S4A INDUSTRIAL CO.,LIMITED
Factory Address:Building S4A, South Third Lane, Qiuyuling Street, Zhangkeng Village, Hengli Town, Dongguan City, Guangdong Province Office Address:#601,floor 6 ,building 1,JINFANGHUA industrial zone, Bantian St. Longgang Dist. Shenzhen, PRC.
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.