When the door switch loses its proper function, we may fall into confusion. However, let's explore the issues that can cause door switches to fail.
The exit switch suddenly doesn't work, I don't know what's going on
1. What should I do if the switch is broken and the personnel cannot go out?
In fact, just unplug the access control power supply or cut off the power supply
2. The door lock does not respond, and the red light is still on.
It is estimated that there is a problem with the line. Check the wiring against the wiring diagram below.
After checking the wiring, if the wiring is correct and there is no disconnection, then see if it is caused by poor contact of the switch wiring. The exit switch is generally connected to PUSH and GND. Here, by the way, it is emphasized that the access control power supply must not be used indiscriminately.
There could also be a problem with the power supply. When the access control switch does not work properly, we should first check whether the power supply is stable. Possibly a bad connection in the wire, or a loose power plug. Take a look at the power supply and make sure the door switch is getting what it needs from enough power.
Second, the fault may lie in the switch itself. Access switches may become worn or damaged over time. Check the exterior of the switch for signs of breakage or deformation. If this is the case, it is recommended to replace the switch in time to ensure the continuous and stable operation of the access control system.
In addition, the connection of the access control switch is also a key factor that needs attention. Check for damaged, loose or loose wires connecting to the switch. Sometimes, wrong installation or negligence may lead to unreliable connection, which will affect the normal operation of the access control switch. Please make sure that the connection is firm and reliable, and maintain good electrical conductivity.
Finally, environmental factors will also have an impact on access control switches. Extreme climatic conditions (such as high temperature, low temperature, humidity, etc.) may cause the switch to not function as expected. In this case, we need to consider making proper adjustments to the environment of the access control system to ensure the normal operation of the switch.
In this way, together we explore common issues that can cause a door switch not to work. By understanding these issues, we can better protect our access control systems and ensure their reliable operation. Let us work together to solve these problems to achieve efficient operation of the access control system.
Author:Written by Ms.Rebecca Fu from S4A INDUSTRIAL CO.,LIMITED
Factory Address:Building S4A, South Third Lane, Qiuyuling Street, Zhangkeng Village, Hengli Town, Dongguan City, Guangdong Province Office Address:#601,floor 6 ,building 1,JINFANGHUA industrial zone, Bantian St. Longgang Dist. Shenzhen, PRC.
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.