In the process of getting along with you day and night after the automatic induction sliding door is installed and used, it will inevitably have some glitches. These small faults are often caused by sensor failures, such as abnormal movement of automatic sensing translation doors, automatic sensing translation doors are normally open or normally closed, etc!
Microwave Sensor FAQ
1.The automatic induction sliding door caused by the sensor does not move
1.The voltage is too low, please adjust to a suitable voltage
2.Poor contact, check the wires and terminals
2.Abnormal movement of the automatic induction sliding door caused by the sensor
1.The sensor housing is covered with dirt, please clean the surface
2.The environment in the detection area changes suddenly, please check the installation environment
3.The automatic induction sliding door caused by the sensor moves for no reason.
1.Please confirm whether there are moving objects in the detection area, such as flowers and trees, please remove the object
2.There are water droplets on the mask, please stay away from the water droplets
3.The vibration of the installation surface causes problems with the sensor, please fix the installation surface
4.The detection area of the sensor overlaps with the door body, please adjust the angle of the sensor to keep it away from the door body.
4.The automatic induction sliding door switch is normal, but the sensor light is not on
The sensor light is in poor contact and does not affect normal use. Can be repaired and debugged or replaced with a new sensor
5.The automatic induction sliding door sensor light is always on, and the door is always open
1.The sensitivity of the sensor is too high
2.There may be foreign objects within the sensing range of the sensor
6.The sensor is not sensitive, and the sliding door will be opened automatically when people come very close
1.The sensitivity of the sensor is too low, please adjust the sensitivity
2.The sensing range of the sensor is too small, please adjust the sensor angle to an appropriate range.
Note:There are standards for the range sensitivity of the automatic sensing sliding door sensor, and it is not allowed to debug without permission.
Author:Written by Ms.Rebecca Fu from S4A INDUSTRIAL CO.,LIMITED
Factory Address:Building S4A, South Third Lane, Qiuyuling Street, Zhangkeng Village, Hengli Town, Dongguan City, Guangdong Province Office Address:#601,floor 6 ,building 1,JINFANGHUA industrial zone, Bantian St. Longgang Dist. Shenzhen, PRC.
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.