Is there anything that needs to be paid attention to in the daily use of the Automatic door Operator? Of course, the answer is yes. As the saying goes, pay attention to the ship that lasts for ten thousand years. Although this sentence is a bit exaggerated to use in the automatic sliding doors, in daily life, we have too many local needs to pay attention to, and we must pay attention to driving. Safety, we should pay attention to the details of the work, even if we drink water, we should pay attention to the temperature of the water.
Therefore, as a product that many people choose in the door area passage, our Automatic door also has some precautions in the daily use process.
Understand these precautions and do a good job in the daily use of the Automatic Sliding Door Operator, and then adjust the service life of the effective extension Automatic Door to reduce the probability of various defects and accidents in the daily use of the Automatic Door. The following S4A will take us to understand what these six things are.
1. In the process of use, every time we open the Automatic door for use, we must close it in time after the use, and we must ensure the tightness of the closure, otherwise, it may cause the sliding door to cause some unnecessary damage and then affect normal operation.
2. Under normal circumstances, the emergency stop switch cannot be used to stop the door for a long time, which will cause certain damage to the Automatic door Operator. Normally, don't cross an hour.
3. When cleaning the door wing of the Automatic door, the lower part of the anti-collision rubber strip should not be bumped or twisted with hard objects to avoid damage to the internal electrical components. If the anti-collision rubber strip is found to be damaged, it should be repaired in time.
4. When cleaning the Automatic door Operator, ensure that it is wiped with a wrung towel, and the parts on the top of the door must not leak water into the door to avoid damage to the internal electrical components. The surface of each sensing element should not be wiped with a hard cloth or hard object, so as to avoid scratching the surface of the plexiglass so that the sensor cannot sense or announce an error signal so that the door does not operate or malfunction.
5. When opening the emergency loose door, be sure to pull the turning position of the lubricating door beyond the vertical frame of the display window, and then fold the emergency loose door. If it is not used, please contact our company for training in time.
6. Whether using the function of the Automatic door Operator or Automatic Door Closer, if the center has other functions, you should let the function end before going to the next function. Be sure not to repeatedly twist the key to open while the door is in motion.
The above are the precautions for using and maintaining automatic sliding doors in daily life. Welcome to consult us for more knowledge about sliding doors
Author: Written by Ms.Anna Zhang from S4A INDUSTRIAL CO., LIMITED
Factory Address:Building S4A, South Third Lane, Qiuyuling Street, Zhangkeng Village, Hengli Town, Dongguan City, Guangdong Province Office Address:#601,floor 6 ,building 1,JINFANGHUA industrial zone, Bantian St. Longgang Dist. Shenzhen, PRC.
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.