Exit Button
Home /

Exit Button

Installation Steps for Infrared Access Control Switch

December 23 , 2024

Step 1: Prepare the Tools and Materials

Before starting the installation, make sure you have the following tools and materials ready:

  1. Infrared access control switch kit (including the switch device, power adapter if needed, and relevant accessories).

  2. Screwdriver set.

  3. Measuring tape.

  4. Electric drill (if you need to drill holes for mounting).

  5. Wall anchors and screws (depending on the mounting surface).


Step 2: Choose the Installation Location

  1. Select a suitable location near the entrance door. The position should ensure that the infrared sensor of the switch has a clear and unobstructed view of the area where people will pass through. Usually, it's recommended to install it at a height of about 1.2 to 1.5 meters from the ground for optimal detection.

  2. Use the measuring tape to mark the exact position on the wall where the switch will be mounted.


Step 3: Mount the Switch

  1. If the wall is made of solid materials like concrete or brick, you may need to use the electric drill to make holes at the marked positions according to the size of the wall anchors. Insert the wall anchors into the holes.

  2. Align the mounting holes on the back of the infrared access control switch with the wall anchors or the screw holes you've prepared. Use screws to firmly fix the switch onto the wall. Make sure it is mounted level and stable.


Step 4: Connect the Power Supply

  1. Check the power requirements of the infrared access control switch. Some may operate with batteries, while others need to be connected to a power source through a power adapter.

  2. If it's battery-powered, insert the appropriate batteries into the battery compartment according to the polarity markings.

  3. For those connected to a power adapter, plug the adapter into a nearby electrical outlet and then connect the adapter's output cable to the power input port of the switch following the correct wiring instructions. Make sure all connections are secure.


Step 5: Adjust the Settings (if applicable)

  1. Some infrared access control switches may have adjustable settings such as detection range, sensitivity, and delay time. Refer to the user manual of the specific switch model to access the settings interface.

  2. Adjust these parameters according to your actual needs. For example, you can widen or narrow the detection range based on the width of the entrance, increase or decrease the sensitivity depending on the environment, and set an appropriate delay time for the switch to remain activated after detecting a person.


Step 6: Test the Switch

  1. After completing the installation and settings, it's time to test the infrared access control switch. Walk through the detection area in front of the switch to see if it can accurately detect your presence and trigger the access control function as expected.

  2. Check if the switch responds promptly and reliably. If there are any issues like false detections or no response at all, double-check the installation, power connection, and settings to troubleshoot and make necessary adjustments.


Author: Written by Ms.Anna Zhang from S4A INDUSTRIAL CO., LIMITED


S4A INDUSTRIAL CO., LIMITED

Contact Us
  S4A-Security For All.S4A Industrial Co., Limited, Founded in 2010, We have been dedicating in access control production R&D and sales for 10year till now. With the belief that we do one thing well in a lifetime, our CEO has been in this industry for 15 years. During the past 10 years, our products have been exported to various countries and regions. And 90% of customers come from the recommendations of cooperative customers, and 80% of the turnover comes from cooperative customers in the past 10years.Your business is a plant, we are the gardener, our mission is to water and fertilize the plant, and make it become the towering tree. We attach great importance to the partner's appeal, customer's suggestions, and feedbacks. To strengthen Product quality awareness, client's service awareness. Our clients and S4A are on the same path walking for many years.       S4A's future would be even more brilliant, this is related to all of our staff's working sweat. When you join this team, you will feel an invisible power to drive walk forward. S4A mainly produces a series of security Door Access Control such as:Network Access Controller, Locker board, Electromagnetic lock, Standalone door Controller, Automatic door opener, etcOur team can manufacture products, sell products, and do after-sales.In the realm of access control, one company stands out for its unwavering commitment to providing security services for everyone. S4A, which stands for "Security for All," has been at the forefront of access control technology for the past 13 years. With its own state-of-the-art factory and a strong focus on research and development, S4A has continuously delivered cutting-edge access control machines with the latest functions. Their dedication to product quality, customer feedback, practicability, and cost performance sets them apart as a leader in the industry.Factory and R&D Expertise:S4A takes pride in its fully-equipped factory, where skilled engineers and technicians work tirelessly to develop and manufacture access control solutions that meet the highest standards. The company's investment in research and development has resulted in a steady stream of innovative products that cater to evolving security needs.By staying ahead of the curve, S4A ensures that their customers have access to the latest advancements in access control technology.Quality Assurance and Customer Feedback:At S4A, product quality is of paramount importance. The company adheres to rigorous quality control procedures throughout the manufacturing process to guarantee the reliability and durability of their access control machines. Each product undergoes comprehensive testing to ensure it meets industry standards and exceeds customer expectations. S4A also places great value on customer feedback, actively seeking input to continuously improve their products and services. By listening to their customers, S4A maintains a customer-centric approach and delivers solutions that address real-world security challenges.Practicability and Cost Performance:S4A understands that access control solutions must not only be technologically advanced but also practical and cost-effective. The company's emphasis on practicability means that their products are designed to be user-friendly, easily integrated into existing systems, and adaptable to various environments. S4A's access control machines are known for their intuitive interfaces, simple installation processes, and seamless compatibility with other security systems. Additionally, S4A strives to provide cost-effective solutions without compromising on quality. Their competitive pricing ensures that security is accessible to businesses and individuals of all sizes.With 13 years of industry experience, S4A has cemented its position as a leading provider of access control solutions. Through their dedication to "Security for All," the company has set a benchmark for excellence in product quality, customer satisfaction,practicability, and cost performance. S4A's in-house factory and research and development capabilities enable them to stay at the forefront of technological advancements in the field of access control. As the company continues to evolve and innovate, S4A remains committed to empowering individuals and organizations with the highest level of security, ensuring that everyone can enjoy the peace of mind that comes with a reliable and efficient access control system.We can create value for you!Quality takes great importance for a company's credibility, and buyer's every penny spend must worth it. That is our most basic principle. Our business mainly for wholesale, so we could offer large quantities at competitive prices. During the past 10 years, We work hard to create value for our customers, and with our help, customers have an increasing market share. 99% of the customer...<
  • Address

    Factory Address:Building S4A, South Third Lane, Qiuyuling Street, Zhangkeng Village, Hengli Town, Dongguan City, Guangdong Province Office Address:#601,floor 6 ,building 1,JINFANGHUA industrial zone, Bantian St. Longgang Dist. Shenzhen, PRC.

  • Call us

    0086 755 29450011

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

about

contact