Automatic door opening machine repair
Automatic door opening machine maintenance
Automatic door opening machine cleaning
Automatic door opening machine repair
1. The remote battery is exhausted: Do you remember changing the battery in the remote control last time? If your remote automatic door opener suddenly stops signaling for the door, consider whether the battery is dead before calling maintenance. Long-range batteries typically take about two years to replace.
2. Remote signal interruption: After putting the new battery into the remote control, if the door still does not respond, the signal between the remote control and the remote control automatic door opening machine may be interrupted. Two common causes of signal interruption are if your remote is out of range or if the receiver antenna of the opener is damaged.
3. Lock button engaged: Another easy fix is to make sure the lock button on the wall-mounted control panel is not pressed. You may accidentally press this button while performing normal daily activities, and you can easily unlatch the door by pressing the lock button. After unlocking the door, test the operation of the door by pressing the open button on the panel.
4. Door control wiring failure: If the door cannot be opened by remote and wall-mounted panel methods, there may also be a problem with the control wire of the door system or the receiver plate of the Door opener.
Automatic door opening machine maintenance
1. The transmission part of the door crane should be kept clean and without attachments.
2. often clean the debris in the tank.
3. Add lubricating oil to the mechanical parts every quarter.
4. Check the storage performance of secondary power supply protection device and standby power supply every month.
Automatic door opening machine cleaning
Internal cleaning with a mild cleaning agent to clean the inner wall of the automatic door opening machine and various accessories, and then dry it with a soft cloth. For a better cleaning, you can remove some accessories, dry them off and put them back in place.External cleaning Clean the digital panel with a soft clean cloth. Sprinkle water on the cleaning cloth, rather than directly onto the surface of the automatic door opening machine, so that the surface humidity can be even. Automatic door openers, handles and storage surfaces should be cleaned with a neutral cleaner and then dried with a soft rag.
Do not use benzene, thinner or bleach for cleaning. They will damage the surface of the automatic door opening machine and can start a fire. Warning: When the automatic door opening machine is energized, do not spray water to the automatic door opening machine, otherwise electric shock may occur and even cause problems. If the outside of the automatic door opening machine is stainless steel, a year to wipe one to two times.
Author:Written by Ms.Rebecca Fu from S4A INDUSTRIAL CO.,LIMITED
Factory Address:Building S4A, South Third Lane, Qiuyuling Street, Zhangkeng Village, Hengli Town, Dongguan City, Guangdong Province Office Address:#601,floor 6 ,building 1,JINFANGHUA industrial zone, Bantian St. Longgang Dist. Shenzhen, PRC.
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.