Access Power Supply
Home /

Access Power Supply

How to choose the access power supply for access control?

September 26 , 2020



1. Wide temperature adaptation range

 

Due to the relatively large temperature difference across the world. If the product does not have a wide range of adaptation to high and low temperatures, there is no way to guarantee the reliability of the system, especially the power supply, so when choosing a product, you should choose according to your own installation environment. Generally speaking, the temperature adaptation range is within -40 degrees to 85 degrees, which can meet the requirements.

   

2. Wide voltage adaptation range, stable power output

 

The input voltage fluctuates frequently, either high or low. Therefore, the power supply controller must be able to adapt to a wide range of input voltage fluctuations, and the output voltage can be stable at 12V to avoid unstable power supply caused by input voltage fluctuations and affect the normal and stable operation of the access control system.

 

3. Measure the actual output power of the power supply

 

Add a load corresponding to the output power of the power supply, run for more than 48 hours, use a multimeter to measure the actual output voltage and current of the power supply, and compare with the nominal value to check whether the output voltage is stable after the load is added and check the heat output Is it normal?

   

4. Intelligent charge and discharge management of the backup battery

 

Power outages occur in some areas, and access control is directly related to people's lives. It requires normal operation at all times. The backup power supply generally requires that the system can maintain normal operation for more than 4 to 6 hours after the power failure. The power supply has charge and discharge. Management function. The charging and discharging management function of the power supply is mainly to prevent the battery from overcharging and damaging the battery, and it will not be recharged after over-discharge, and the current supply of other devices will be reduced due to the excessive charging current, which will cause the system to be unstable.

  

5. Fault isolation to avoid damage to individual equipment and affect the overall stability of the system

   

Due to the diversity of the hardware equipment of the access control alarm system, it is bound to involve a power supply to supply power to multiple devices in a unified manner. At this time, it should be noted that the purchased power supply should have multiple output terminals for independent power supply and output, and the power supply is required to be able to intelligently judge the output Current, this can solve the problem of centralized power supply or when one output of the power supply fails, it will not affect the output of other power supplies. Even if the output of one power supply is directly short-circuited, it will not affect the output of other ports. Of course, the power supply will not be burned out due to a short-circuit of one port.

 

Access Power supply.jpg

Written by Danny Zeng(Ms.) From S4A INDUSTRIAL CO.LIMITED

Contact Us
  S4A-Security For All.S4A Industrial Co., Limited, Founded in 2010, We have been dedicating in access control production R&D and sales for 10year till now. With the belief that we do one thing well in a lifetime, our CEO has been in this industry for 15 years. During the past 10 years, our products have been exported to various countries and regions. And 90% of customers come from the recommendations of cooperative customers, and 80% of the turnover comes from cooperative customers in the past 10years.Your business is a plant, we are the gardener, our mission is to water and fertilize the plant, and make it become the towering tree. We attach great importance to the partner's appeal, customer's suggestions, and feedbacks. To strengthen Product quality awareness, client's service awareness. Our clients and S4A are on the same path walking for many years.       S4A's future would be even more brilliant, this is related to all of our staff's working sweat. When you join this team, you will feel an invisible power to drive walk forward. S4A mainly produces a series of security Door Access Control such as:Network Access Controller, Locker board, Electromagnetic lock, Standalone door Controller, Automatic door opener, etcOur team can manufacture products, sell products, and do after-sales.In the realm of access control, one company stands out for its unwavering commitment to providing security services for everyone. S4A, which stands for "Security for All," has been at the forefront of access control technology for the past 13 years. With its own state-of-the-art factory and a strong focus on research and development, S4A has continuously delivered cutting-edge access control machines with the latest functions. Their dedication to product quality, customer feedback, practicability, and cost performance sets them apart as a leader in the industry.Factory and R&D Expertise:S4A takes pride in its fully-equipped factory, where skilled engineers and technicians work tirelessly to develop and manufacture access control solutions that meet the highest standards. The company's investment in research and development has resulted in a steady stream of innovative products that cater to evolving security needs.By staying ahead of the curve, S4A ensures that their customers have access to the latest advancements in access control technology.Quality Assurance and Customer Feedback:At S4A, product quality is of paramount importance. The company adheres to rigorous quality control procedures throughout the manufacturing process to guarantee the reliability and durability of their access control machines. Each product undergoes comprehensive testing to ensure it meets industry standards and exceeds customer expectations. S4A also places great value on customer feedback, actively seeking input to continuously improve their products and services. By listening to their customers, S4A maintains a customer-centric approach and delivers solutions that address real-world security challenges.Practicability and Cost Performance:S4A understands that access control solutions must not only be technologically advanced but also practical and cost-effective. The company's emphasis on practicability means that their products are designed to be user-friendly, easily integrated into existing systems, and adaptable to various environments. S4A's access control machines are known for their intuitive interfaces, simple installation processes, and seamless compatibility with other security systems. Additionally, S4A strives to provide cost-effective solutions without compromising on quality. Their competitive pricing ensures that security is accessible to businesses and individuals of all sizes.With 13 years of industry experience, S4A has cemented its position as a leading provider of access control solutions. Through their dedication to "Security for All," the company has set a benchmark for excellence in product quality, customer satisfaction,practicability, and cost performance. S4A's in-house factory and research and development capabilities enable them to stay at the forefront of technological advancements in the field of access control. As the company continues to evolve and innovate, S4A remains committed to empowering individuals and organizations with the highest level of security, ensuring that everyone can enjoy the peace of mind that comes with a reliable and efficient access control system.We can create value for you!Quality takes great importance for a company's credibility, and buyer's every penny spend must worth it. That is our most basic principle. Our business mainly for wholesale, so we could offer large quantities at competitive prices. During the past 10 years, We work hard to create value for our customers, and with our help, customers have an increasing market share. 99% of the customer...<
  • Address

    Factory Address:Building S4A, South Third Lane, Qiuyuling Street, Zhangkeng Village, Hengli Town, Dongguan City, Guangdong Province Office Address:#601,floor 6 ,building 1,JINFANGHUA industrial zone, Bantian St. Longgang Dist. Shenzhen, PRC.

  • Call us

    0086 755 29450011

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

about

contact