Frequently asked questions about door closers
How to choose a suitable door closer?
What is the working principle of the door closer?
How to choose the Automatic Door Closer model?
Where is the door closer installed?
Precautions for door closer installation?
How to choose a suitable door closer?
What is the working principle of the door closer?
The door closer relies on hydraulic buffer to form damping. When the door is opened, it compresses the hydraulic oil. After the door is opened, the hydraulic oil releases energy to generate closing and opening energy. Then adjust the speed through the two upper screws to achieve a satisfactory closing speed.
How to choose the Automatic Door Closer model?
It is necessary to choose the load-bearing capacity of the door closer according to the weight of the door and the width of the door. It is recommended to ask a professional to install it during installation to avoid unnecessary losses.
Where is the door closer installed?
When installing the door closer, it should be as close as possible to the 10 cm position of the door shaft, and at the same time, the side with the two-stage speed control valve is facing the direction of the door hinge, so that the effect of the closer can be better played.
Precautions for door closer installation?
1. Before installation, do not turn the gear shaft over 180 degrees, otherwise, the door closer will be damaged.
2. When debugging the gear with the rocker arm, when it is turned to 180 degrees, the gear will be in a stopped state, and it should be returned to the original position in time to avoid damage to the door closer when debugging again.
3. The door closer has an automatic closing function, and it is strictly forbidden to pull the door by hand.
4. After installation, do not use artificial assistance to make the door close faster, which will accelerate oil leakage or reduce the service life.
Author:Written by Ms.Rebecca Fu from S4A INDUSTRIAL CO.,LIMITED
Factory Address:Building S4A, South Third Lane, Qiuyuling Street, Zhangkeng Village, Hengli Town, Dongguan City, Guangdong Province Office Address:#601,floor 6 ,building 1,JINFANGHUA industrial zone, Bantian St. Longgang Dist. Shenzhen, PRC.
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.