What is a door stopper
The door stopper is also commonly known as the door touch, and it is also a device that absorbs and positions the door leaf after it is opened, so as to prevent the wind from blowing or touching the door leaf and closing it. Door stoppers are divided into two types: permanent magnet stoppers and electromagnetic door stoppers. Permanent magnet stoppers are generally used in ordinary doors and can only be controlled manually; electromagnetic door stoppers are used in electrically controlled door and window equipment such as fire doors, which have both manual control and automatic control. control function.
Door suction classification
Ordinary permanent magnet door stopper
Ordinary permanent magnet door stoppers are divided into wall-mounted and ground-mounted types according to the installation form, and divided into plastic type and metal type according to the material.
Wall-type electromagnetic door stoppers are divided into standard type, heightened type, extended type, box-mounted type, concealed type, long-arm type, etc. according to different structures; floor-type electromagnetic door stoppers are composed of wall-type electromagnetic door stoppers and right-angle ground mounting brackets ;The chain-type electromagnetic door stopper is composed of a wall-type electromagnetic door stopper and a chain fastener; the user chooses according to the installation conditions of the site.
Door stopper installation
Door stopper installation step 1
The first thing to do is to determine the installation method and decide whether it should be installed on the wall or on the floor tiles.
Door stopper installation step 2
Start to find the best position of the door stopper, open the door to the maximum position, then place the door stopper at the corresponding place where it will work, fix the door stopper by hand, then close the door, and open the door to see if the door stopper can work.
Door stopper installation step 3
Use a pen to draw the position of the door stopper, and also write down the position of the door stopper installed on the door, so that we can loosen the door stopper, and then use an electric drill to drill holes at the position of the door stopper we noted down. Then you can do the following.
Door stopper installation step 4
Fix the door stopper on the ground with screws, and then fix a part of the door with screws to see if the door stopper works. After the position is completely determined, we start to tighten the screws.
Door stopper maintenance
1. Prevent bruises during handling.
2. When cleaning, try not to wet the metal plated parts, first remove dust with a soft cloth or dry cotton yarn, and then wipe with a dry cloth to keep it dry. Do not use colored cleaners or forcefully damage the surface layer
Author:Written by Ms.Rebecca Fu from S4A INDUSTRIAL CO.,LIMITED
Factory Address:Building S4A, South Third Lane, Qiuyuling Street, Zhangkeng Village, Hengli Town, Dongguan City, Guangdong Province Office Address:#601,floor 6 ,building 1,JINFANGHUA industrial zone, Bantian St. Longgang Dist. Shenzhen, PRC.
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.