The automatic door opener is a kind of intelligent door control equipment, which can realize the function of automatic opening and closing of the door, that is, realize the automatic control of the door leaf. Therefore, installing an automatic door opener can turn ordinary manual doors into automatic doors. This article will introduce the installation process of automatic door openers for you.
1. Installation location
Pay attention to avoiding direct sunlight: the automatic door opener cannot be exposed to sunlight for a long time, otherwise, it will affect the life and stability of the equipment. Therefore, care should be taken to avoid direct sunlight during installation.
In addition to avoiding direct sunlight, the opening direction of the door should be considered when choosing the installation location, such as surface or concealed installation.
2. Preparation
Confirm the size and weight of the door to choose the appropriate automatic door opener model;
Confirm the opening and closing direction and required angle of the door to choose the correct installation method of the automatic door opener;
Confirm the power supply and control system, including power supply voltage, control signal interface, etc.;
Prepare the tools and materials needed for installation, including electric drills, wrenches, screws, washers, lubricants, etc.
3. Installation steps
Confirm the installation position and height of the door, determine the installation position of the automatic door opener on the door, and mark it out;
Fix the bracket of the automatic door opener on the door, and adjust the position and angle of the bracket so that the automatic door opener can correctly control the opening and closing of the door leaf;
Fix the automatic door opener on the bracket and fix it firmly with screws;
Connect the power supply and control signal lines, and test whether the automatic door opener works normally;
If necessary, install sensors, including light sensors, human sensors, etc., to achieve more intelligent automatic control; such as installing an access controller: If you need to use the access control system to control the switch of the automatic door opener, you need to install an access controller. First, you need to connect the access controller to the door lock, and then connect the controller to the automatic door opener.
Debug and optimize the automatic door opener so that it can meet actual needs.
4. Maintenance
Regular cleaning: The automatic door opener will accumulate dust and dirt during use. If it is not cleaned in time, it will affect the service life and safety of the equipment. Therefore, it is recommended to clean the equipment at regular intervals.
Lubrication and maintenance: The parts of the automatic door opener need to be lubricated regularly to maintain the normal operation of the equipment. The equipment can be lubricated with special lubricating oil.
Pay attention to safety: When using the automatic door opener, you need to pay attention to safety to avoid accidents. For example, do not let children play near the equipment, do not place items above the door, etc.
Author: Written by Ms.Anna Zhang from S4A INDUSTRIAL CO., LIMITED
Factory Address:Building S4A, South Third Lane, Qiuyuling Street, Zhangkeng Village, Hengli Town, Dongguan City, Guangdong Province Office Address:#601,floor 6 ,building 1,JINFANGHUA industrial zone, Bantian St. Longgang Dist. Shenzhen, PRC.
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.