Access Controller Planning/Installation and Wiring Recommendations
1. Equipment installation planning (introduce the method, requirements, and advantages and disadvantages of equipment installation planning)
Equipment installation planning is very important. It involves many aspects of system implementation, such as the amount of wire used and the convenience of equipment debugging; it involves the daily inspection and maintenance of equipment after the system is completed; it involves system upgrades and expansions. There are two main planning methods for equipment installation: centralized installation in the weak current room and distributed installation on site. Both installation methods have their advantages and disadvantages. Customers can plan according to the actual situation on site.
2. On-site distributed installation
The alarm access control is installed in the weak electricity room on the floor, the monitoring room of the community, or the outdoor high place; the on-site access control controller and access control equipment box are installed near the access control points, such as in the ceiling and the corridor of the unit door of the community. The lines of the card reader, door opening button, and electric lock are laid from the on-site access controller to the access point site. The distributed installation has the advantages of simple wiring and less wire usage; at the same time, the electric lock line and door-opening button line can be arranged within the control area of the access control point, and it is impossible to enter the control area by destroying the electric lock line and door-opening button line. Relatively high. The disadvantage is that system debugging and maintenance are cumbersome in some cases. For example, if the access control equipment box is installed in the ceiling, it is more difficult for maintenance and debugging personnel to operate it. Based on the characteristics of the distributed installation, it is generally suitable for community video access control, large factories and warehouses, large playgrounds, and other occasions with relatively scattered access control points.
3. Centralized installation in weak electricity room
All controller equipment is installed in the weak current room or machine room on the floor. The wires of all card readers, door opening buttons, and electric locks are laid from the weak electricity room on the floor to the access point site. The centralized installation has the advantages of simple construction, clean and beautiful equipment installation and wiring, convenient system debugging and maintenance, and convenient system upgrade and expansion. The disadvantage is that the amount of wire used is large, and the distance between the farthest access control point and the weak current room is required to be no more than 100 meters. Generally suitable for office buildings, intelligent buildings, and other places with many and concentrated access control points. These occasions are generally planned to have larger weak current rooms or weak current wells, which are suitable for the centralized placement of weak current equipment.
Author: Written by Anna Zhang from S4A INDUSTRIAL CO., LIMITED
Factory Address:Building S4A, South Third Lane, Qiuyuling Street, Zhangkeng Village, Hengli Town, Dongguan City, Guangdong Province Office Address:#601,floor 6 ,building 1,JINFANGHUA industrial zone, Bantian St. Longgang Dist. Shenzhen, PRC.
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.