In the entire access control system, there is a vital device. If it fails, it will directly affect the security index of the access control system. It is the magnetic lock. Today I will talk about some common failures of magnetic locks.
One. The magnetic lock sounds loud when closing the door
1. Check whether the rubber gasket is installed
2. Check whether the screws are loose
3. Check whether the distance between the magnetic lock body and the suction plate is proper.
Two, the suction symbol is not reliable
After the magnetic lock is used for a long time, some of the locks will have a weakened charm
1. Check whether the 1A/12V/24V output of the power supply is reduced.
2. Check whether there are foreign objects such as dust, rust, dirt, etc. on the surface of the magnet
Three, the magnetic lock iron plate often need to be adjusted?
1.Check whether the iron plate is equipped with pins.
2.Check whether the iron plate is equipped with rubber pads.
3. It is recommended that customers put a "screw fixing agent" on the screws.
Four. The magnetic lock is obviously adjusted to be delayed, but it cannot be used normally?
1. The "delay adjustment" of the magnetic lock starts timing after power-on, not after closing the door.
2. The delay of the magnetic lock is 0, 3, 6, 9 seconds, how many seconds is the check time setting
Five. The magnetic lock has been energized and the suction is normal, but the green indicator light is not bright
It is possible that the sensing element of the magnetic lock is damaged, and it is recommended to replace it.
6. Why doesn't the matched controller work?
Check whether the controller "output" contact is correct.
A magnetic door lock is an important part of the access control system. Whether it can operate normally or not determines the safety factor of the access control system to a large extent. The above 6 points are the types of faults that often occur in magnetic locks. You can troubleshoot by yourself. If it still cannot be handled, It is recommended to contact professional maintenance personnel for on-site treatment.
Author:Written by Ms.Anna Zhang from S4A INDUSTRIAL CO.,LIMITED
Factory Address:Building S4A, South Third Lane, Qiuyuling Street, Zhangkeng Village, Hengli Town, Dongguan City, Guangdong Province Office Address:#601,floor 6 ,building 1,JINFANGHUA industrial zone, Bantian St. Longgang Dist. Shenzhen, PRC.
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.