>High temperature and aging resistance
>Corrosion and acid and alkali resistance
>The groove width is generally 3-5mm
>40-50mm depth
Brand:
S4AItem NO.:
AZC-FF46Loop Cable for Vehicle Loop Detector
Model No.: AZC-FF46
What is loop detector cable?
Used in vehicle monitoring equipment for detection of traffic movements
via creation of inductive loop to frequency signal flowing in cable
and metallic parts of vehicle. These cables are designed for installation
in a slot cut into the carriageway.
How do you install a loop detector wire?
INSTALLATION TECHNIQUES
Cutting a slot.
Cleaning and drying the slot.
Laying in the inductive-loop detector wire.
Sealing the sawcut.
Connecting the wire to the lead-in cable.
Connecting the cable to the terminal strip in the cabinet.
Ensuring the harness connects the terminal strip to the electronics unit.
Model | AZC-FF46-1 |
color | red |
Material | tinned copper wire |
Below 3 meters | Ensure that the inductance value is between 100uH and 30OuH |
3-6 meters | 5-6 turns |
6-10 meters | 4-5 turns |
10-25 meters | 3 turns |
Below 25 meters | 2 turns |
The scope of work | Between 100uH-300uH |
Model (AZC-FF46-1) | Number/core (mm) | Outer diameter (mm) | Conductor material |
0.5 square | 19*0.18 | 1.35 | Tinned |
0.75 square | 19*0.23 | 1.58 | Tinned |
1.0 square | 19*0.26 | 1.7 | Tinned |
1.5 square | 19*0.32 | 2.1 | Tinned |
S4A User Manual FF46-1_Loop Cable for Vehicle Loop Detector
>Rated voltage:5- 250v>Wiring:Wiring connection (with terminal block)>Rated current:5- 20mA>Interface:Outer diameter 3mm direct plug interface>Work pressure:2- 5mpa>Electrical properties:Up to 100mA/250VAC
> Card reading distance: 0~3M> Output Interface: WG26,WG34,RS485> Operating Voltage: DC12V 80MA> Size: 121x78x22mm
> Waterproof, IP65> Free demo and SDK> Stable reading distance: 1~5m> Frequency: 902~928MHz or customize other frequency
> Waterproof, IP65> Free demo and SDK> Stable reading distance: 5~15m> Frequency: 920-925MHz or customize other frequency
> 860~868MHz, 902~928MHz frequency band(frequency customization optional)> Built-in antenna with effect distance up to 200mm*> Support USB2.0 interface with VSP(Virtual Serial Port) or HID mode
> Output relays: 240V/5A> Reaction time: 10ms> Size of Housing: L78 x W40 x H108mm
> Cable Length: 0.8M> USB port: Support USB 1.1 / 1.0 / 2.0> Chips: CH-340
> Output relays: 230V AC, 115V AC, 24V DC/AC, 12V DC/AC (See the label on the detector)> Reaction time: 100ms> Size of Housing: L78 x W40 x H108mm
S4A appreciate any of your inquiries and sincerelyhope to enjoy a fruitful long-term business relationship with youto share in the mutual benefits, If you have any questions, please feel free to contact us.
IPv6 network supported
English
français
Deutsch
русский
italiano
español
português
العربية
Türkçe
Tiếng Việt
Indonesia
