Products
Products
Home /

Tuya and TTlock Smart Devices

/

Wifi Tuya Module

/4CH WiFi Tuya Smart Switch AC/DC 7-32V Remote control support Jog Module

New Products

4CH WiFi Tuya Smart Switch AC/DC 7-32V Remote control support Jog Module

>Input:AC/DC 7V - 32V

>Network: 4G

  • Brand:

    S4A
  • Item NO.:

    S4A-4CH
  • Specifications
  • Download

4CH WiFi Tuya Smart Switch AC/DC 7-32V Remote control support Jog Module

Model No.:S4A-4CH/S4A-4CH-H


Tuya Remote Control


What is a WiFi relay switch?

WiFi Relays are equipped with firmware built into the board that will allow you to control one relay at a time, a bank of relays or all relays at once with manual and automatic refreshing command set. WiFi Relay Controllers allow wireless computer controlled switching from any computer connected to a network.


How do I connect my Tuya Smart Switch?

To connect the device in AP mode, switch the light on and, after 10 seconds, switch it off and then switch it on and off continuously until it starts . ashing quickly (about 3 times a second). Continue switching it on and off until it starts to . ash slowly (about once every 3 seconds).


Input

AC/DC 7V - 32V

Network

4G

Frequency band

2.4G

Connection method

Wifi


Tuya Remote Control

Tuya Remote Control

S4A Datesheet_4CH WiFi Tuya Smart Switch AC/DC 7-32V Remote control support Jog Module

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related Products
Tuya Wifi Switch Button
1CH Tuya wifi switch button single relay module supports 7-32V

>Input: 5v MicroUSb/ DC 7 - 32V>Output: 10A Max,1 gang

2CH Wifi Tuya module
2CH WiFi Smart Switch AC/DC 7V-32V support 433MHz remote control

>Input:AC/DC 7V-32V>Frequency:433Mhz(Without remote control)

hand-wave door exit buttons
Hand-Wave Door Exit Buttons

>Power Supply:DC12 or 24V>Output Contact:NO/NC/COM>Panel Material:1.8mm Thick 304 stainless steel

Card Reader Issues
USB Fingerprint Scanner Devices To Enroll Users

Fingerprint reader FR-002 to work with ACB-001 002 004 series.> built-in Wiegand output and TCP/IP to authorize users.> Support: Mifare cards 13.56MHz + FingerIn the same network, 10pcs reader, only enroll 1 time and then upload it by software

keyless card reader
Single Door Keyless Card Reader

> Card type: 125KHz or 13.56MHz Card> KR100EM: 125KHz (WG26 output)> KR100Mifare: 13.56MHz (WG34 output)

Wifi Access Control System
WiFi Access Control System With APP Door Lock Keypad

>Card type:EM>Operating Voltage:DC 12-24V>Card Reading Distance:2~5cm

RFID Access Reader
Wireless RFID Access Reader

> 433MHz Rolling Code technology> Card type: 13.56MHz Mifare card> Programmable Wiegand output of the> Receiver: 26 bits or 34 bits> Communication distance: 30m maximum> Ultra-low power consumption> Waterproof, conforms to IP65

Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

about

contact