Categories
>Input: 5v MicroUSb/ DC 7 - 32V
>Output: 10A Max,1 gang
Brand:
S4AItem NO.:
S4A-1CN1CH Tuya wifi switch button single relay module supports 7-32V
Model No.:S4A-1CN/S4A-1CN-H
What is a WiFi relay switch?
WiFi Relays are equipped with firmware built into the board that will allow you to control one relay at a time, a bank of relays or all relays at once with manual and automatic refreshing command set. WiFi Relay Controllers allow wireless computer controlled switching from any computer connected to a network.
How do I connect my Tuya Smart Switch?
To connect the device in AP mode, switch the light on and, after 10 seconds, switch it off and then switch it on and off continuously until it starts . ashing quickly (about 3 times a second). Continue switching it on and off until it starts to . ash slowly (about once every 3 seconds).
Input | 5v MicroUSb/ DC 7 - 32V |
Output | 10A Max,1 gang |
Item weight | 35g |
WIFI | IEEE 802.11 b/g/n 2.4GHz |
Frequency | 433.92Mhz(Without remote control) |
Information transmission | voice |
Network | 4G |
Frequency band | 2.4G |
Connection | WIFI |
S4A Datesheet_1CH Tuya wifi switch button single relay module supports 7-32V
> Frequency: ISM 902~928MHz or 860~870MHz> Protocol: ISO18000-6B, ISO18000-6C (EPC GEN2)> Size: 243x22x10mm
> With Signal Output> Voltage: DC12V or DC24V> Holding Force: 280kg(600Lbs)> Current Draw: 12V/500mA 24V/250mA> Lock Size: 258Lx42Wx26H(mm)> Armature plate: 180x38x11mm
NO/NC/COM;115Lx70Wx14H(mm)
> Finger Capacity: 1000> User Capacity: 3000> Semiconductor sensor(Support: Fingerprint+RFID+Pincode)Support USB to download attendance record
>Input:AC/DC 7V-32V>Frequency:433Mhz(Without remote control)
>Input:AC/DC 7V - 32V>Network: 4G
> Card type: EM Card> Metal case, embedded design> Waterproof lP66> User capacity: 990 Normal Users + 10 Visitor Users> 3 access modes: Card, PIN, Card + PIN> PIN length: 4~6 digits> Wiegand 26/34 bits input automatic identification
> Card type: EM or Mifare Card> Hardware User: 1000> APP User: 100 (including 255 fingerprint/card/PIN users)> Waterproof, conforms to IP66> Metal housing, anti-vandal> iOS and Android available> Multiple Access Modes: Smartphone, Fingerprint, Card, PIN
> Frequency: ISM 902~928MHz or 860~870MHz> Protocol: ISO18000-6B, ISO18000-6C (EPC GEN2)> Size: 243x22x10mm
> With Signal Output> Voltage: DC12V or DC24V> Holding Force: 280kg(600Lbs)> Current Draw: 12V/500mA 24V/250mA> Lock Size: 258Lx42Wx26H(mm)> Armature plate: 180x38x11mm
NO/NC/COM;115Lx70Wx14H(mm)
> Finger Capacity: 1000> User Capacity: 3000> Semiconductor sensor(Support: Fingerprint+RFID+Pincode)Support USB to download attendance record
>Input:AC/DC 7V-32V>Frequency:433Mhz(Without remote control)
>Input:AC/DC 7V - 32V>Network: 4G
> Card type: EM Card> Metal case, embedded design> Waterproof lP66> User capacity: 990 Normal Users + 10 Visitor Users> 3 access modes: Card, PIN, Card + PIN> PIN length: 4~6 digits> Wiegand 26/34 bits input automatic identification
> Card type: EM or Mifare Card> Hardware User: 1000> APP User: 100 (including 255 fingerprint/card/PIN users)> Waterproof, conforms to IP66> Metal housing, anti-vandal> iOS and Android available> Multiple Access Modes: Smartphone, Fingerprint, Card, PIN
S4A appreciate any of your inquiries and sincerelyhope to enjoy a fruitful long-term business relationship with youto share in the mutual benefits, If you have any questions, please feel free to contact us.
IPv6 network supported
English
français
Deutsch
русский
italiano
español
português
العربية
Türkçe
Tiếng Việt
Indonesia
